I want to put hydralic steering on the sami. any ideas? Where can I get the ram, valve, etc? Is there a kit somewhere? Can I use my chevy pump?

Full Hydrolic? Why not go asssit? At least then if you loose a hose, you can still get off the trail. Any farm impliment store will have the rams, you will need a 2"x8" ram. What box are you running? Do you have room for a saginaw box from a YJ?

Go Here (http://www.northerntool.com/cgi-bin/ncommerce3/ExecMacro/category/NTE_subfeature.d2w/report?cgrfnbr=96&Go.x=14&Go.y=15)

You know I just asked the same question a week ago, didn't get much info.:confused:

yea this is gonna be an interesting mod. let me know if you find out anything fatkid

Originally posted by ROCKILLER
yea this is gonna be an interesting mod. let me know if you find out anything fatkid

Full Hydrolic? Why not go asssit? At least then if you loose a hose, you can still get off the trail. Any farm impliment store will have the rams, you will need a 2"x8" ram. What box are you running? Do you have room for a saginaw box from a YJ?

:confused:

Originally posted by fatkid
You know I just asked the same question a week ago, didn't get much info.:confused:

Well we still aren't getting much - the axlesnapper link doesn't work. :p

Originally posted by 0ILBURNER


Well we still aren't getting much - the axlesnapper link doesn't work. :p

I think the point of the link was to go 'here' http://www.northerntool.com/cgi-bin/ncommerce3/ExecMacro/category/NTE_subfeature.d2w/report?cgrfnbr=96&Go.x=14&Go.y=15 :rolleyes: