: Parting out Rudezuk
Rudezuk 10-10-2003, 08:20 PM Well time to start a new buggy...
Complete drive train for a zuk!!
96 1.6l 16v sidekick ingine
zuk tranny
1.8:1 Rock Block Doubler Box
6.129:1 Zuk Tcase
Rear dline disconnect
Mean Grean Starter
Flexilite electric fan
Heavy Duty Spidertrax Tcase arms
All conversion brackets, motor mounts
fuel pump, wiring harness computer everything.....
42* cv long slip dlines also come with it! (dlines are heavy duty! agg spline, DOM....these are the shit!!)
5500 oBo.
Complete swap ready to go....Motor has new bearings, timing belt, tensioners.
This setup is bad ass!! Everything has been maintained very very well! Oil changed before every event.
With this setup and 5.38's in some axles I had a 217:1 crawl ratio....absolute perfect!
Single case is 125:1 crawl ratio.
On 37's when this was in my zuk I could cruise at 75mph no problems!
No expense has been spared with this setup...everything is setup ready to drop in your rig, or buggy!
Can hear it run, or drive the rig....runs perfect and the engine has tons of power!
Setup can be left in chassis, if someone wants the chassis, Whole rig can be bought if someone is interested in the whole thing........Come drive it away:D
We are running the placerville event on the 18th....and then parts will be available.
http://www.pirate4x4.com/forum/attachment.php?s=&postid=1742463
Rudezuk 10-10-2003, 08:32 PM Axles....
Rear waggy 44
Front Custom Chevy housing...setup for 28.5" spring width
front axle is setup at 61-62" rear is ~59-60"
5.38's ARB's
High steer arms
1.5" .250 DOM tie rod (still have HD drag link also)
New TRE's
New ball joints,
New warn premium Hubs,
New Rotors
Rear Disk Brakes
5x 5.5 pattern
New bearings
Warns and CTM's in the front
Superior 4140's in the rear
Extreme air 12v 100% Duty 4cfm compressor with wiring harness and switches.
The front will have a new Crane heavy duty diff cover
and the rear has a heavy diff cover also.
These axles are all setup ready to go....all new stuff in it!
Have a complete set of spare axles and ujoints for front and rear axles. Spare hubs and 1 hub/rotor assembly.
4k obo
Rudezuk 10-10-2003, 08:34 PM Here are pics of rig in action..
http://www.rokzuki.com/samurai/video/RudeZuk.mov
http://iwolfe.com/rigs/rigmovies/rudezuk.avi
$55,000? Isn't that a little much?
EDIT: Nevermind...thought the O in OBO was a 0.
Rudezuk 10-10-2003, 09:01 PM Originally posted by Goof
$55,000? Isn't that a little much?
EDIT: Nevermind...thought the O in OBO was a 0.
Changed it for you:D
larryboy 10-10-2003, 09:02 PM Originally posted by Rudezuk
Extreme air 12v 100% Duty 4cfm compressor with wiring harness and switches.
are you still saving this for me? with the air tank? assuming you don't sell the buggy complete:D .
Rudezuk 10-10-2003, 09:07 PM Originally posted by larryboy
are you still saving this for me? with the air tank? assuming you don't sell the buggy complete:D .
You are second in line if i dont sell it complete....but yes i will save it for you:D
larryboy 10-10-2003, 09:08 PM Originally posted by Rudezuk
You are second in line if i dont sell it complete....but yes i will save it for you:D
thanks:) .
Rudezuk 10-10-2003, 09:14 PM Will consider partial trade for LT1, LS1, or atlasII
Islandzuki 10-10-2003, 09:16 PM If you are planing on seperating the drivetrain I would be interested in the T-case and rock block....
Rudezuk 10-10-2003, 09:26 PM Originally posted by Islandzuki
If you are planing on seperating the drivetrain I would be interested in the T-case and rock block....
PM me an offer:D
Todd W 10-10-2003, 10:43 PM Shane how much for the whole buggy?
My bro may want it :D
Tydes 10-11-2003, 12:33 AM Wish i had the money!
Ky_Chopper 10-11-2003, 03:44 AM If you sell the drive train, I'd be interested in the bare chassis. Or what ever was left in it.. Have my own drivetrain, ect..
CragRat 10-11-2003, 04:06 AM Originally posted by Rudezuk
Extreme air 12v 100% Duty 4cfm compressor with wiring harness and switches.
Have a complete set of spare axles and ujoints for front and rear axles. Spare hubs and 1 hub/rotor assembly.
Please send me a price for this ...
Dave
805-795-0270
Rudezuk 10-11-2003, 07:33 AM Originally posted by Ky_Chopper
If you sell the drive train, I'd be interested in the bare chassis. Or what ever was left in it.. Have my own drivetrain, ect..
You realize this is in CA?
Rudezuk 10-11-2003, 07:33 AM Originally posted by Todd W
Shane how much for the whole buggy?
My bro may want it :D
Todd....Call me...we can talk:D
Rudezuk 10-11-2003, 07:34 AM Originally posted by CragRat
Please send me a price for this ...
Dave
805-795-0270
Dave you will be 3rd in line for the compressor..
Ky_Chopper 10-11-2003, 07:43 AM Im a trucker, without drive train or axles, we can put in the trailer with what ever load I get. If I can afford the chassis..lol
Rudezuk 10-11-2003, 07:57 AM Originally posted by Ky_Chopper
Im a trucker, without drive train or axles, we can put in the trailer with what ever load I get. If I can afford the chassis..lol
sounds good!!
Ill let you know what happens to the rig....Im expecting that it will get parted out...If like to sell the whole thing together...but we will see..
Ky_Chopper 10-11-2003, 09:14 AM email me if you need any help shipping any of the parts. I run Ca atleast once a month and go all over our great USA! Heck, Im leaving for Hayward, Ca in a few minutes, stopping in Denver to pick up a TH350c, AA, and a Toy tc!!! Wont I be passing you on 5?Give me some kind of idea what you might want for the chassis b4 I get my hopes up.
KY_Chopper@pirate4x4.com
thanks
P
Ky_Chopper 10-11-2003, 09:19 AM I just watched your vids.. Really nice rig.. Hell-a-scious driving!
Ky_Chopper 10-11-2003, 09:25 AM I hauled a Porsche 944 from Pittsburg Ca, with a load of frozen strawberries!!! Ofcourse I had to add anitfreeze..lol
Rudezuk 10-11-2003, 10:49 PM let me see how things go...but ill send you a pm with the price:D
Arya Ebrahimi 10-12-2003, 12:20 AM Willing to seperate the axles?? I'm interested in the rear.... If so, PM me with a ballpark. Thanks
Ary
Rudezuk 10-12-2003, 07:59 AM Originally posted by Arya Ebrahimi
Willing to seperate the axles?? I'm interested in the rear.... If so, PM me with a ballpark. Thanks
Ary
axles must go together..
Overkiller 10-12-2003, 11:24 PM Originally posted by Rudezuk
axles must go together..
If you change you mind on that I'd like a price on the front
Jason R 10-13-2003, 01:21 PM Shane, will you sell me the seats and belts out of your buggy? PM or call me mang. :D
Jason
916 532 1540
IronBenderII 10-13-2003, 05:46 PM Shane, if you're planning on going with a different wheel, let me know...
Jack
Rudezuk 10-13-2003, 09:25 PM Originally posted by IronBenderII
Shane, if you're planning on going with a different wheel, let me know...
Jack
I think i am Jack.....PM me an offer on these:D
Rudezuk 10-13-2003, 09:28 PM Originally posted by Jason R
Shane, will you sell me the seats and belts out of your buggy? PM or call me mang. :D
Jason
916 532 1540
dont think ill sell these unless i sell the whole rig....but ill let you know..
Arya Ebrahimi 10-13-2003, 09:38 PM In case Jack doesn't want the wheels, what kind are they and do the tires come with?? If they do, are they in any kind of shaped to be run on a trail rig that sees some street time?? I might be interested as well if they are. I'm assuming 17" beadlocks because of the Krawlers....but what kind
Ary
Jason R 10-13-2003, 10:55 PM Originally posted by Rudezuk
dont think ill sell these unless i sell the whole rig....but ill let you know..
Good deal. :D
Rudezuk 10-14-2003, 07:06 AM Originally posted by Arya Ebrahimi
In case Jack doesn't want the wheels, what kind are they and do the tires come with?? If they do, are they in any kind of shaped to be run on a trail rig that sees some street time?? I might be interested as well if they are. I'm assuming 17" beadlocks because of the Krawlers....but what kind
Ary
The wheels are 17" x9 3" BS, 38bolt bead locks by rock stomper (very heavy duty!)
Tires have only seen trail time, no street......i would say 95% tread left.
gopar68 10-14-2003, 06:16 PM Hey Shane,
still have not seen the price on the whole rig- pm me with a $$$$
My buddy is looking for a complete rig, as a matter of fact he will be spotting for me in placerville, so he can check it out if you have not commited to parting out.
Thanks, Doug
Rudezuk 10-14-2003, 08:57 PM Originally posted by gopar68
Hey Shane,
still have not seen the price on the whole rig- pm me with a $$$$
My buddy is looking for a complete rig, as a matter of fact he will be spotting for me in placerville, so he can check it out if you have not commited to parting out.
Thanks, Doug
PM'd you:D
rocksam 10-14-2003, 11:59 PM I need the motor and kit, email me a price at rocksam_25@hotmail
Arya Ebrahimi 10-15-2003, 12:23 AM PMed you about stuff...
Rudezuk 10-15-2003, 06:41 AM Rock, arya
you both have PM's:D
C&R Motorsports 10-15-2003, 08:10 AM hey shane don't forget these beadlock rings you had us make for ya
Rudezuk 10-15-2003, 08:11 AM Originally posted by C&R Motorsports
hey shane don't forget these beadlock rings you had us make for ya
Ill call you today bob:D
Hoyden 10-15-2003, 10:08 AM If you end up parting it out, I'd be interested in the rear d-line disconnect (if you'd be willing to pull it off of the t-case).
Jackie
Rudezuk 10-15-2003, 10:14 AM Originally posted by Hoyden
If you end up parting it out, I'd be interested in the rear d-line disconnect (if you'd be willing to pull it off of the t-case).
Jackie sent a PM
webilt 10-15-2003, 09:28 PM which tranny are you running,, if it's a Zuk,, I might have a friend interested in it,
how much$$
:)
RockHound 10-15-2003, 09:38 PM put me in the waiting line on the wheels
Thanks Doug
Rudezuk 10-16-2003, 07:29 AM PM's sent:D
Arya Ebrahimi 10-16-2003, 09:03 AM Can we get an update so we know where things sit as far as what's taken, if you're selling the whole thing whole, or what?? Just like to know where I stand in line for stuff and what all's going on. Thanks :D
Ary
Rudezuk 10-16-2003, 09:13 AM Originally posted by Arya Ebrahimi
Can we get an update so we know where things sit as far as what's taken, if you're selling the whole thing whole, or what?? Just like to know where I stand in line for stuff and what all's going on. Thanks :D
Ary
Looks like we will be parting it out...
I have a potential buyer for the axles and compressor right now....and then people in line for the compressor if that doesnt sell..
Ive talk to tons of people about this stuff....
But cash talks:D
I pm'd you back, never heard back from you...Pm me with what you would like from this.
Rudezuk 10-17-2003, 09:41 AM BTT:D
Ky_Chopper 10-18-2003, 12:06 AM You've never sent me a price on the chassis. Or can I work out a partial deal on shipping some of the other parts Xcountry??
Rudezuk 10-19-2003, 09:56 AM BTT
Parts can be taken off today!
Season is all finished:D
Rudezuk 10-20-2003, 07:09 AM front and rear axles are sold.
Air compressor is sold.
larryboy 10-20-2003, 04:24 PM Originally posted by Rudezuk
Air compressor is sold.
i call dibs on next years part out;) . ttt for ya.
Ky_Chopper 10-20-2003, 05:30 PM any chance you want to breakup the coil overs?
Rudezuk 10-20-2003, 08:54 PM Originally posted by Ky_Chopper
any chance you want to breakup the coil overs?
Sure looks like jim is interested in a pair of them too...
PM me an offer..
Shrock 10-21-2003, 01:16 AM Sent ya another email!
Rudezuk 10-21-2003, 08:14 AM Originally posted by Shrock
Sent ya another email!
:D
Rudezuk 10-21-2003, 10:01 AM Originally posted by Ky_Chopper
any chance you want to breakup the coil overs?
Still have one pair of them left....Jim got one pair of these.
Arya Ebrahimi 10-21-2003, 03:48 PM Originally posted by Rudezuk
front and rear axles are sold.
Air compressor is sold.
Damn, can you PM me an updated price on the tires/wheels. Thanks
Ary
Rudezuk 10-21-2003, 05:28 PM Originally posted by Arya Ebrahimi
Damn, can you PM me an updated price on the tires/wheels. Thanks
Ary
Clean out your box!!!
Arya Ebrahimi 10-21-2003, 05:46 PM Originally posted by Rudezuk
Clean out your box!!!
All clean :D
Rudezuk 10-21-2003, 06:29 PM Originally posted by Arya Ebrahimi
All clean :D
PM sent
Bones 10-30-2003, 06:58 AM PM sent.
Rudezuk 10-30-2003, 07:00 AM Chassis is still for sale:D
| |