|
: 78-79 Ford F250-350 Dana 60 Width TacomaJoe 12-12-2001, 02:22 PM I searched all thought the POR boards and could not find the answer to my question. How wide (wms to wms) are the RC D60F axles off the 1978-1979 F250's and 350's? Are the 250 and 350 axles the same width? Joe:roxy: MaxCrack 12-12-2001, 03:39 PM Yes, they are the same axle, size and all. As for what that size is, I could tell you, but mine is broken down into every little seperate piece right now. :rasta: welndmn 12-12-2001, 03:40 PM i think its 67 66CJdean 12-12-2001, 04:09 PM A newer 60 and a 78/79 60 are about 1.5" different I am pretty sure. 68 for the 78/79 and 69.5 for the newer ones. TacomaJoe 12-12-2001, 05:12 PM Thanks guys:D Joe:usa: FearMe 12-13-2001, 08:54 AM My 79 HP60 was 70" wms to wms. broncorob 12-13-2001, 11:40 AM mine is 70" also WhiskeyTango 12-13-2001, 01:08 PM So does the pumpkin line up with an NP205 married to a C6? Or do you have to shorten it all up like you have to with the newer RC60's? I want one FearMe 12-13-2001, 01:19 PM Not sure about a 205 but C6/Atlas lined up fine. Needed a custom crossmember though. http://www.greatnorthern.net/~fearme/tech/project2.html | |