|
cruiserbrett 12-14-2001, 09:49 AM Does anyone know what tranny/crossmember mount I can use for the advance adapters crossmember for the NV4500 to toyota transfercase??? I will be using the two holes drilled in the bottom of the adapter. I am trying to find out the info so I can get a polyurethane mount but no luck... I could use P/N or application. Thanks!!! cruiserbrett 12-14-2001, 11:34 AM I'm retarded... I meant to ask for a tranny mount to use on the bottom of the adapter, not using the AA crossmember!!! I need a rubber(or Poly) mount that fits the two holes on the bottom of the AA NV4500 to L/C tcase adapter... I am NOT using the rear t-case crossmember that bolts to the rear of the case... "Does anyone know what tranny/crossmember mount I can use for the advance adapters crossmember for the NV4500 to toyota transfercase??? I will be using the two holes drilled in the bottom of the adapter. I am trying to find out the info so I can get a polyurethane mount but no luck... I could use P/N or application. Thanks!!!" rugburn 12-14-2001, 12:12 PM I used the stock Toyota mounts for engine and tranny mounting positions when I bolted in the 350/sm465. I had them and they work really well. If not, try a generic Daystar or Energy Suspension body mount. Or just use a Stock GM manual trans mount from Goodwrench or NAPA. :eek: :nuke: :usa: | |