|
ZuKi 8185 11-03-2003, 08:32 PM Hey, I was just wonderin how much lift i have with just a spring-over ?My leaf springs are almost straight but i could fit 33's. And would i be able to go higher with out and problems useing stock axles and what not. Jay Islandzuki 11-03-2003, 09:49 PM :rolleyes: measure where the old perch was to the top of the new perch.........depends on how big your perch is....... you could make your Zuk as high as you want.....dosent make a difference with what type of axles you have:shaking: just try lurking and reading old posts you could learn alot from them:flipoff2: Bill4rest 11-03-2003, 11:38 PM Originally posted by ZuKi 8185 Hey, I was just wonderin how much lift i have with just a spring-over ?My leaf springs are almost straight but i could fit 33's. And would i be able to go higher with out and problems useing stock axles and what not. Jay 31's if you want to wheel at all. penguin 11-04-2003, 08:52 PM I ran a spring over and a body lift with 32s. Never had a problem, and was great off road. Still was ok as a driver. rrahl 11-08-2003, 11:43 AM Originally posted by penguin I ran a spring over and a body lift with 32s. Never had a problem, and was great off road. Still was ok as a driver. barf....you lost me with the body lift comment, springover is anywhere from 4.5" to 5.5" depending on what spring perch you use. hope you don't mind not flexing and tipping over with stock springs. just my .02 Jon | |