i have 4 hella 4000's and i want to wire them to my rack i would just like some info on the best way to run the wires. i can deal with the fuses, relays, and switches i just need to know the best way to hide the wires. some thing like this...http://www.expeditionexchange.com/ics2/PA260088.jpg

If you remove your roof rails there is a small hole in the roof itself that works out well to run wires through in combination with a grommet of some sort.

Also, I have seen people sneak the wires under the edge of the windshield seal.

I have done neither of these firsthand.

Hope that helps.

yes that does help and i will probably end up drilling another hole near the luggage bar bolts and run the wires over that gasket.

oh btw did you get that from d-web j/w

Run the harness up the inside of the a pillar, the out the door, then through the raingutter drain.

j

I did not get it from Dweb. I got it from looking at pictures, other guys trucks and researching when I did my own lights.

oh because i saw your post on d-web j/w tho

I have been known to do that occasionally.