Alignment Shop (Sacto Area)

[Stonefly]

Any recomendations for an alignment shop in the Sacramento area?

[HeyBeerMan]

It's called Stanley.




Get a tape measure and set your own toe-in.

[Green Lantern]

Sometimes the tape measure doesn't get you close enough. If you don't mind driving up the hill a bit try the Big-O in El Dorado Hills. Ask for Chris.

[Stonefly]

Toe is set. I need more than just toe.

[KC_JoNeS]

Originally posted by Stonefly
Toe is set. I need more than just toe.

What else is there?? Do you have to adjust your drag link to your pitman arm?? Did you hit a curb or something??

Solid axle, cant adjust caster without shims...can only do toe in or drag link.

[Stonefly]

Coming out of Barrett a couple of weeks ago, I fubar'd the drag link. Built a new drag link with DOM & heim joints (sweet). Toe is set.
I want to get the rig on a rack and make sure the alignment is correct. I was just looking to see if anyone could recomend a shop that does more than ricers. :flipoff2:

I'll try Big O. Thanks.

[azrockrat]

if ya dont mind runniong down town there is a shop there on 12th and g iirc that does good work i dont rmember the name of it off hand been a while since i was in sac. there is agood shop in roseville but i can t remeber the name of it if i rember it i will pm ya with it

[Dan-H]

I wouldn't go to just any Big O but Big O in eldorado hills is a good shop that does know a thing or two about jeeps.

If it is still in business, hunter wardlow down in Sacto on stockton and 34th or 33rd is also a great alignment shop.

not that you can do much with a YJ other than set toe...

[fivetenben]

Theres a shop downtown called "G12" (probably the same one azrockrat is talking about). Great shop. I took my pathfinder in there years ago, when they couldnt get the caster into spec because of my lift kit, they didnt charge me a penny. Ive been back there several times since, wouldnt go anywhere else.

[Stonefly]

I'll try the Big-O in Eldorado Hills.


Thanks again.