Can oyu guys shoot me some pics of your mini truck Ps pump mounting?
Dan:skull:

Originally posted by crawlin cruiser
Can oyu guys shoot me some pics of your mini truck Ps pump mounting?
Dan:skull:

You mean mounted on a Mini or a Landcruiser? :D

Here is a 1985 truck PS pump on a 1976 FJ40, 2F with smog pump. It has a '79 and later 2F with holes drilled in the block for the OEM pump bracket. The mount is the Toyota Bracket from the 22RE. The hole in the bracket lines up with the stock holes. Because of the smog pump belt, the lower front support is cut away on the bracket.

<IMG SRC="http://members.home.net/cglabe1/photos/Psmount.jpg">

theres no resivior on those pumps hey... I thought I was missing something:rolleyes: . So all you need is the stock brackets (mini Truck) and a 79 and up 2F? And everthing should mount up??

Thanks soo much
Dan:beer: :beer: :beer: :beer: :beer: :beer: :beer:

Originally posted by crawlin cruiser
theres no resivior on those pumps hey... I thought I was missing something:rolleyes: . So all you need is the stock brackets (mini Truck) and a 79 and up 2F? And everthing should mount up??

Thanks soo much
Dan:beer: :beer: :beer: :beer: :beer: :beer: :beer:

Having a '79 and up 2F would also allow you to use the OEM FJ60 pump with attached reservior and bracket. I didn't have that bracket and I was looking for a cheap and easy solution. If you have an engine that does'nt have the PS bolt holes, you can fabricate and adaptor with 2 inch angle stock using the front two head bolts and the water pump bolt shown in the figure as attachment points. Then just bolt or weld the 22R bracket to the adaptor.