83 ignition module cross reference

[bobjohnson]

I have an 83 720 pickup, I think the ignition module is bad, ex plugs don't fire. Are there any other cars that used the used the same distributor?

[fj40guy]

Bob,

All my Nissan Manuals are still in storage, but I think the '83 still have the module mounted on the distributor. Two external connections (power and "-" coil wire), two internal connections to the pickup coil in the distributor.

If that is the style, it was very common through out both 4 cylinder and 6 cylinder (Z & 810) used in that time period. I always carried a spare as I had a late model distributor in my old 510.

If you get really stuck... a common GM ignition module 4 connection "crab" can be used. With those I made up a piece of aluminum to act as heat sink, and mounted that on the fender well. Datsun with GM module (http://dimequarterly.tierranet.com/articles/tech_hei.html)

Good luck,

Tom :usa:

[bobjohnson]

Thanks Tom,
The ignition module is in the distributor and has 4 connectors, E B C and I. But they are all external, this engine does have 8 spark plugs and 2 coils.