Got any descriptions or pics of good methods?

Thanks,
Jay

I'd show you if I didn't have to pay $20.

I mounted mine like any other radiator. Survived a :rollover:

http://www.snort4x4.com/~4xford/images/302/griffin1.jpg

Look for Arndog on the Land Cruiser section, he made me a bracket that is just tits.

Originally posted by GOAT1
I'd show you if I didn't have to pay $20.

hey thats tight. all take and no give :flipoff2:


jay i will get some pics for ya in the morning. i have a cross flow and the manufacture said to hold it by the side tanks and not the bottom cross support like you see alot of people do.

Very interested Camo. I want to see how people are supporting the bottom.

What brand are you using?

Appreciate the photos!

Jay

Originally posted by camo

I have a cross flow and the manufacture said to hold it by the side tanks and not the bottom cross support like you see alot of people do.

I sure see a lot of factory cars with aluminum rad and plastic tanks supported by the cross supports.

Have you had or seen problems with this?

said it before...I'll say it again... Don't forget to FULLY isolate it from mild steel, or you'll find out the meaning of electrolosis the hard way.
This has been covered in the pig section, try a search.:eek:

i am using a howe.

man these pics turned out crappy. let me try and get some better ones

note that the tublar mount you see is for my electric fan.

Weld tabs on the tank like so, you can see the discoloration of the shroud where one tab is welded on and the second one is just below the winch battery cables. Not the best pic but it is all I had. Works real good IMO.... Oh and don't laugh about the yellow sheetmetal it is all I had and I was in a hurry... :D :D

This wouldn't be for the secret buggy buildup, would it?:D

Originally posted by GOAT1
I'd show you if I didn't have to pay $20.


Get over it !!!! :flipoff2: :flipoff2: :flipoff2: :rolleyes:

Hey Camo, Griffies have 2 1 " strips across the top and bottom to use as mounting surfaces, if you come at a Griffie from the sides you risk loosening the core welds during frame flex............howes must be built different.

Thanks for the pics guys.

My neighbor is putting an Olds 455 in a CJ6 and I think he
plans on going with one of the generic Howe radiators
that come without mounts.

Jay