|
fatkid 12-18-2001, 11:53 PM Decided to go ahead and make a our own power steering set up, We are going to use a Toy IFS power steering parts. Anyone done it yet, with some pics? Should be cool, the box/pump worked well on TB's runna with his 35's so it should be good enough for the Zuk. Time was the only issue before but the sched looks good so we'll have the time to do befor the Hammers. Stay tuned...:) poppycock 12-19-2001, 12:43 AM sweet! zuknut 12-19-2001, 04:03 AM I have it on my zuk and it works great . I run 35" TSL and had to add a cooler to help keep the pump from running hot in the tight spots also used toyota steering shaft because of the larger joints Unable to post pictures not paid the $20.00 Bigger Valves 12-19-2001, 09:17 AM are you talking about using toy pickup 4x4 ifs steering stuff?? that's what i wanna do.. should be plenty beef.. i got the box and the steering shaft basically now just waiting on the sammy.. it should all be cake once you get the steering shaft worked into the column and order your draglink to specs.. fatkid 12-19-2001, 09:22 AM Yup, its a Toy 4WD IFS steering box and pump. As far as the Drag link I run a Toy Hy-Steer arms so some .250 DOM and a couple of 3/4-16 weld in's should work fine. The drag link is straight.:) Bigger Valves 12-20-2001, 01:34 PM Originally posted by fatkid The drag link is straight.:) yes yes, for sure.. i meant the drag link ends to fit the steering arm and toy box.. no sweat! fatkid 12-20-2001, 10:54 PM Heim joints:) Rockrat 12-22-2001, 07:44 AM fromm what year did you get your box Kidd??? fatkid 12-22-2001, 12:25 PM 86 box, and it's almost done. Should be sweet. ammelk 12-26-2001, 02:19 PM Originally posted by fatkid 86 box, and it's almost done. Should be sweet. Lets see it Biatch.....:flipoff2:..sounds good Phatty...:p fatkid 12-26-2001, 09:26 PM It's done and I must say it looks good, maybe I'll post some pics. Biatch... :flipoff2: Rockrat 12-26-2001, 09:31 PM Please Mr kid post Pics I'm gettin da box this weekend and it sure would be nice to see it already done. hows that fur a$$$ ki$$$in :smokin: fatkid 12-26-2001, 09:38 PM I'll get some tomorrow :) ammelk 12-27-2001, 07:02 AM Originally posted by fatkid I'll get some tomorrow :) sure ya will...:flipoff2:..sure ya will..:D rotozuk 12-27-2001, 03:53 PM Please do post some pictures of your IFS setup.! I'm currently doing the same to mine! I just needed more room to clear my engine swap, and have seen the more typical Toyota Celica box snap the output shaft leaving you stuck on the trail. So I figured I'd give the IFS box a try. Got a pretty good deal on an 86 box. -Wayne My engine swap: http://aaaprodisplays.com/wayne/updates/updates.html :eek: Gozuki 12-27-2001, 06:15 PM Yes Pics!!! | |