|
FJ45Mike 10-30-2001, 03:12 PM I am puttting a painless system in and I have several stock switches to use. I have one with a small round knob. The knob is much smaller than the others and it has no label on it. It is a simple push pull with a very small round body. I am calling the behind the dash part the body. Any guesses? My system was so bad I have no idea what it did before I removed the old system. Thanks for any help! DCruiser138 10-30-2001, 03:16 PM im thinkin the dome light switch. if its stock cruiser.....my dome light switch is exactly what you described. Jason M 10-30-2001, 03:17 PM possibly for the dome light but it might be aftermarket on a 65 Jason M 10-30-2001, 03:18 PM Faster than me by a couple of secs <IMG SRC="smilies/wink.gif" border="0"> FJ45Mike 10-30-2001, 04:46 PM It must be the dome light! Since I have had the top off the entire time that I have owned it, that would explain why nothing happened. The previous owner put in some newer electrical stuff. Thanks for the help! | |