EB 5.5 lift - the coils look like they are going to pop out the sides - I know a drop bracket for the rear will fix most of this, but I'm wondering if anyone makes an arm that goes in the stock location that has the spring perch mount "redegreed" already and has the caster built in?


and no it's still not running, but it did fire and break in the cam last night :)


Or will any of you build me some and how much$ / how long?



:usa:

All for Fun makes extended arms with built in castor. The built in castor should take care of the spring bow. If it doesn't then you can get tapered shims from Sierra Bronco.
Fearme showed me a good trick, on the lower cup ditch the stock clamp & weld a loop on as a retainer. Up top just use new hardware.

Cam break in ?? What, no roller motor for your steed? :D

Yup, Either buy there, ro they are super simple to make as well
http://sierrabronco.com/vShoppingCart-PayPal/coilshim.htm

the shims aren't really too much of an option since they lift it another inch on top of the 5.5....


:usa: