|
mud-magnet 12-22-2001, 09:01 AM My turn signle won't come on but when i put the 4-way flashers on they work fine........so when i put the switch on the turn light on the dash won't come on, the buzzing won't work or anything....but works with the 4-ways......any ideas? all fushes are good too, and all bulbs work....... thanks guys:roxy: poppycock 12-22-2001, 04:30 PM did you add 1 qt of blinker fluid? :flipoff2: mud-magnet 12-22-2001, 06:42 PM no, it was pretty low so i had to put 1.5 qt.s .........lol......... does anyone know what it would be? i'v never seen this happen before(no signle but i have 4-ways?)........it seems very odd..... tZUKnami 12-22-2001, 08:42 PM Have you checked the turn signal switch itself? M.Martian 12-22-2001, 11:06 PM It doesn't sound like the same issue that I have with mine. Mine has a tendency to not come on depending upon what position the steering wheel is in. If the wheel is straight, the pins that re-center it after a turn prevent it from allowing the turn signal to turn on. You might want to check the turn signal lever itself. izooki13 12-23-2001, 12:43 AM my .02 is check the ground on the blinker itself....you'd be suprised at how some electricity will work one way but not another. also, if your blinker fluid is really low, 1.5 qts doesn't seem like enough, i once had to replace one of them hydrolic blinker fluid lines, and it was a PITA, big time. call me dumb but it took me a while to find that damn line and took me 5 hrs to replace it.............LMFAO. -justin izooki13 12-23-2001, 12:46 AM maybe you ran your blinker too long without fluid in it, it might of siezed up...........ok way too many :beer: ......going to bed now. :smokin: :barf: :zzz: mud-magnet 12-23-2001, 01:10 PM Originally posted by izooki13 maybe you ran your blinker too long without fluid in it, it might of siezed up...........ok way too many :beer: ......going to bed now. :smokin: :barf: :zzz: that might be it, i never checked the level when i bought it........lol......:flipoff2: but i think its the wireing, cause when i put my new front blinkers in behind the grill it stoped working just after that........but i'm not sure...... mud-magnet 12-23-2001, 06:37 PM thanks for all the help guys, i got it working a little wile ago:p ...... for those who are woundering, on my rear tail lights(not stock) i had the live wire running between the mount for the light itself and the rear bumper(not stock eather) and it wore through an kept blowing my fuse :eek: , but i thought that i the fuse was just bad so replaced it and thought nothing of it.......then when i checked it it was gone again, so all together i went through 5 fuses......now ts working fine......thanks to all and have a happy holiday.....:D :roxy: | |