I received a 15 lbs CO2 tank for Xmas. Beside the obvious ( PoweTank), what other regulators are available? Where to buy? I need 150 PSI for the tires and 90 PSI for air tools. Many thanks in advance for your suggestions.

150 PSi for tires:eek: must ride like a brick! :flipoff2:


Go here:

http://www.williamsballoons.com/co2_regulators.htm

Here is what I'm working on in my work in progress console in the scout.

The two gauges on the left side of the console are for my OBA system. Left hand gauge reads pressure in the tank and supply lines to the front and rear quick disconnects. The gauge on the right is what pressure is being sent to the ARBs. There is a knob for an adjustable regulator on the left side of the console( out of view) for setting the ARB feed pressure.

http://www.fototime.com/{06D3F49D-7DEA-4D8E-B2CB-ACD20366569A}/picture.JPG

That's very cool OS, I never thought of moving the regulator and guages off the damn tank. What kind of a hose or pipe would you need to do that? Or is the tank secretly stashed under the console? :D

SC

Originally posted by scrover
That's very cool OS, I never thought of moving the regulator and guages off the damn tank. What kind of a hose or pipe would you need to do that? Or is the tank secretly stashed under the console? :D

SC

I run a OBA system. It uses 3.5 gallon air brake tank off of a semi and a York compressor. I do have a 5lb Co2 tank plumped in to the system in case of compressor failure. It has a gaugeless regulator from the above link set a 175psi. The air lines are normal DOT approved flexible semi truck brake lines.

Gotcha, thanks.

SC

Old Scout, nice set up!