Finished the Ford 5 spd to Dana 300 Adapter, one step closer! Who can help me post some pics?

Sounds good you should go wheeling at the Hammers.:)

I got some cool pics, anybody want to post for me?

Originally posted by Gozuki
I got some cool pics, anybody want to post for me?

You have a red star, so you should be able to attach them.

Here it is, dammit!:rolleyes:

Geez, that looks about as crude as that booster adapter you sent me!!! Nice...how does it all fit in the rig?

Here's another...

Well, the v6 and 5spd/dana 300 are within 1" of the overall length of the stock setup. If I cange the pulleys and water pump over to Taurus stuff, it will actually be 1/2" shorter overall...And the idea is to actually replact this adapter with my own "klone VI" (copyright 2001), that will have the right bearing supports and bolt patterns on it. This adapter includes a second oil seal (visible in first photo) to ensure the ATF in the tranny stays separate from the 90wt in the tcase. That is later though, as right now I need to make a stainless tank that will use the ranger fuel pump/sender so the stupid computer stays happy.:rolleyes:

BTW, hows that booster adapter working for you? Mudlite says his is "stiff"--- :eek: :flipoff2:

The booster is patiently waiting for me to get my rig rolling, but it looks really Gucci sitting in the top of my tool box! I have faith...not to pry into whatever you and Muddy have going on but is it a "good" stiff or a "bad" stiff? :)

I don't know, I didn't make his adapter. I just pointed out the master cylinder that I had used, and I guess he made his own...I am going to abandon the master, and go to "some thing" else...