How are you mounting these bad boys.. I think I am going to need a set, just need to get some idea how people are mounting them.. Pictures would be great!

Thanks

I mounted my rear one through the frame rails between the gas tank and the bumper. The front one goes through the tubular cross member typical of a TJ.

BTT PLEASE! :D

I thought I had a better pic of the way the sway bar was mounted on this one but I can't find it. The universal sway bar kits come with a tube that can be welded to just about anything. We just incorperated that tube into the rear tubes on this jeep.

http://members.aol.com/lavenderbrothers/rearvoss.jpg

Serch for pics of JR's bronco. You can see the rear sway bar mounts on his real well.

Been searching for JR's not getting any good shots of the swaybar.. :(

Here is a pic of a Currie swaybar on the front of my Jeep. The kit comes with a 1-3/4" .120 wall dom piece of tubing. It sits across the top of the frame about 1/4" from the grille. There are gussets on each side of the tubing on both sides of the Jeep. It is definitley pretty interesting driving down the road without it hooked up :D

I can take a pic of how the tubing is attached to the frame if you need it.

David

What are the dimensions of the currie bar(length, diameter, arm length)? Thanks
Rob

Here's the pic I was looking for.

http://members.aol.com/lavenderbrothers/rear.jpg