Okay, so I need a set of ABS hubs, that will go right onto my non-ABS spindles, and make my new NSO shafts work? Just making sure before I drop $150 on parts... I will be calling KC at NSO as well, to be sure.

help me guys! never done this before.

adam,

whats up...when i was switching my diffs and axles from my ABS truck to the non-ABS, I ran into the issue of the ABS hubs not working with the non-ABS spindles...

I dont remember if it was an issue of the thicker axle not fitting in an unbored non-ABS spindle or if it was a length issue due to the different style hubs. Regardless i used the ABS spindles front and rear and siliconed the hole for sensor in the rear....just a heads up...

thanks Kaan... not what i wanted to hear, and was confirmed by Eric Riston :(

alright, so i just procured myself a 1995 Discovery rear axle (complete), to swap parts with. another $200 down the drain... Anyone want to buy a 24 spline diff? only 75k miles on it.

I have a set of ABS spindles you can have for cheap. - Front hubs, too.

The ABS RR axles I had under Valdez are now getting scrapped in favor of the eatons...

E mail me.

J-L

would have been great, except that shipping sucks :( instead i'll be into this for $200, then sell the diff for $100.