Looking for a adapter from a 700R4 to a 203.
Anyone make one??
Need it to hook up my 203-205 dual case setup.

Thanks

I think a company called SEARCH DAN just came out with one. :flipoff2:

Pete

Take a look at the th-350 adapter;) (same spline and diameter)

read this page:

http://www.offroaddesign.com/catalog/doubler.htm

Just use the stock 700r4/208 or 241 adapter and clock your 203 wherever you want it and drill and tap the six new holes. That is what I did to my 203's flat face. fill the old holes with 3/8 course thread bolts with silicone sealer and bolt it up. The bearing support on the 203 and the camfored edge inside the 208 adapter are a perfect tight fit, so misalignment was not a problem for me. Also you can clock your doubler any way you want it this way. Worked great for me. I think I have an extra 700r4/208 adapter if you feel like offering me something for it. Hope this helps.

Thanks Much For Your Help Everyone !!!