A while back, one of you guys posted a pic of your cruiser that had black treadplate for fenders. (I think a red cruiser, sixgun?)

<IMG SRC="smilies/beer.gif" border="0">

anybody know who this is?

my fenders are pretty jacked, but since it is on the street quite a bit, cutting them off just isn't an option.
(it's hardly legal anyway)

I thought this looked to be a good way to maintain legality and still cut off my eye sores <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">

Nah, that was FJ40Charles.

He has a thread going now, grab his email and he will send you some shots.

Go to my photopoint site below and go to the "Cruisers in Clayton" album and there are a bunch of shots of his rig in action.

There is a guy in Arkansas that is making these, Charles was first, and selling the kit for $500.

<IMG SRC="smilies/beer.gif" border="0">
Thanks, but I'm pretty sure the one I saw had black tread plate for the front fenders.

I didn't see that in the pics, any other ideas?

[ 08-22-2001: Message edited by: Whamo ]

Here you go:
<IMG width=500 height=375 SRC="http://www.pirate4x4.com/ubb/uploads/mutt2.jpg">
<IMG width=500 height=375 SRC="http://www.pirate4x4.com/ubb/uploads/mutt3.jpg">
<IMG width=500 height=374 SRC="http://www.pirate4x4.com/ubb/uploads/mutt4.jpg">

Hey Nolan,

Nice pics of "Muttley" at Clayton, OK.

Charles

Hey, there it is thanks!! <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">

Cfj40, are you a good welder or did you have that done? <IMG SRC="smilies/question.gif" border="0">

BTW... Great Pics for detail <IMG SRC="smilies/wink.gif" border="0">

Whamo,

You don't want me to weld. Let's just say I'm a beginner who did a little gas welding long time ago. I don't have much experience with a mig and it will take me many many years to lay down a good bead like the pros.

Basically, the whole vehicle was built by
Jewell Bohannan of Bohannan 4 wheel drive
in Bentonville, Arkansas.

His email is jdbohannan@hotmail.com or you can call him at work at 501-273-7674

Jewell is a great guy that has owned an FJ40 since 1973 and knows his stuff.

Disclaimer: Not affliated with Bohannan 4 wheel drive.

Hope this helps.. Shoot me an email at
charles.kim@attws.com if you have any other questions.

Charles

Originally posted by fj40charles:
<STRONG>
Disclaimer: Not affliated with Bohannan 4 wheel drive.
Charles</STRONG>

Doesn't "Being Jewel's Bitch" provide some affiliation?

<IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0">
<IMG SRC="smilies/thefinger.gif" border="0">

$500!!!
You can get factory replacements through crash parts outfits for around $100 ea +s/h!

These fender are made out of 1.5 inch tubing and replaces the exiting one. They are designed so I can stand on the fenders.

Basically, I wanted some fenders that I could lean or slide my FJ40 into some trees or rock without having to worry about them getting bent or crushed. Let's just say these will be the last set my Cruiser will need.

You can get the factory replacements, but if you wheel you vehicle much, you'll end up chewing them up unless you really trim them back.

Charles

Cool, Thanks for the info Charles.

<IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">

Yep, that was FJ40Charles sportin the cool front fender tread. Tankota, Wheelinjp and me are playin with an idea to weld 1" thick wall tubing or 1" square around the underside of the stock front fenders to "fend off" those nasty trees that seem to be growin all over WA, <IMG SRC="smilies/biggrin.gif" border="0"> Wheelinjp just finished a set for his CJ5.

(gratuitus non-cool fender pic inserted here)
<IMG width=761 height=530 SRC="http://www.pirate4x4.com/ubb/uploads/Log.jpg">

Whamo, you're welcome. Here are some more pics of the fenders.

<IMG width=506 height=380 SRC="http://www.pirate4x4.com/ubb/uploads/fend1.jpg">

<IMG width=506 height=380 SRC="http://www.pirate4x4.com/ubb/uploads/fend2.jpg">

<IMG width=506 height=380 SRC="http://www.pirate4x4.com/ubb/uploads/fend3.jpg">

<IMG width=506 height=380 SRC="http://www.pirate4x4.com/ubb/uploads/fend4.jpg">

Hey Fj40charles would you be offended if I use that idea? I will probably use smooth plate rather than tread, so if you dont mind?If not I can come up with something a little diff. Thanks let me know

Wheelinjp,

I have no problems if you want to use this design. Hope you have fun building it.. :-)

Charles

Thank you. They wont be exact cause Im not you but I like the idea and wanted to get a close idea.

Thank you. They wont be exact cause Im not you but I like the idea and wanted to get a close idea.