Hey guys I have sold a couple sets of Dana 60's to some pirate members. Thanks to those whom have purchased.

I still have 1 front HP60 left from a 88-91.5 Ford F350.
king pin, high pinion, 8-lug, 69.5" wms, 3.54 gears, complete hub to hub.

This axle will probably need the typical wear parts replaced. rotors have alot of life left in them. May or may not need new pads and calipers.

This axle differs from the 78-79 variety by the length of tube on the driver side of the diff. 78-79 has 6" of tube, 88-91.5 has 3" of tube, making this axle perfect for anyone with a YJ, TJ, etc. that wants to narrow it up a bit but only wants to narrow one side to save $$. From what I have read, if you narrow the pass side only, you can run it between 64" and 66.5" WMS and still have the pinion line up with the T case.

Located in North Attleboro, MA. $950 for the front. Plus shipping if necessary. PM or email jrh713@yahoo.com if interested. I accept Paypal, too:)

I will throw in a matching ford rear D60 for an extra $50

So front HP60 and standard rear D60 $1000.:flipoff2:

Good Guy to work with for axles!!!
TTT:flipoff2:

btt:rolleyes:

btt:flipoff2:

btt

Still available?