Does anyone know of a WWW site that shows the different factory accesory drives available? I need to find measurements and pictures of p.s and alt for short water pump and long water pump. I know what they look like for serpentine but am having trouble fitting an electric fan/shroud between my water pump and radiator.

You shoudnt have any problems if its a K5. Ive got a full 4" between the fan clutch/fan and the rad. Thats with a 4 core and a BB also.

Charlo

http://www.jonesracingproducts.com/cntc.html


Try here (http://www.jonesracingproducts.com/cntc.html)


Not factory but it might help.


beerman

Sorry i didnt say what its going in. The K5 is long gone......cant figure out how to change my nick. Its in my buggy..have pics no way to post. Im working on a solution to the problem..i cut out a good bit of tube work and moved the winch forward about 1.5". This will let me move the rad forward 1.5 and let the electric fan clear the water pump pulley by about an inch or so depending on how it all ends up.
Thanks

Sorry i didnt say what its going in. The K5 is long gone......cant figure out how to change my nick. Its in my buggy..have pics no way to post. Im working on a solution to the problem..i cut out a good bit of tube work and moved the winch forward about 1.5". This will let me move the rad forward 1.5 and let the electric fan clear the water pump pulley by about an inch or so depending on how it all ends up. I had thoughts of going to a short water pump but after looking it over i really hated to loose my serpentine so i broke out the sawzall.
Its this buggy
buggy (hhttp://http://www.pirate4x4.com/forum/showthread.php?s=&threadid=176729)