sfazr2
02-10-2004, 01:45 PM
I was running this, but switched over to a 2dr. s-10 blazer tank so it won't leak and pass smog. It only leaks a little under way off camber tilt. You might be able to get it to seal. i.e. there are no cuts or cracks in the body of the cell, just from where I tried to modify it for a stock GM fuel pump.
The steel box has the top to it but I cut a hole for the GM fuel pump. You need to take the bladder thats in it with it, package deal. The fuel cell has a stock filler modified from the s-10 for the unleaded gas pump. Overall it worked fine but wanted to keep it street legal. The fuel cell hung a little low too.
It's red in color and is part # SUM 290113, 22 gallons. Yeah it's a little dirty too, but for free you can't beat it. Sorry I don't have the stock bail type filler.
email me at gkmissingca@netzero.net
The steel box has the top to it but I cut a hole for the GM fuel pump. You need to take the bladder thats in it with it, package deal. The fuel cell has a stock filler modified from the s-10 for the unleaded gas pump. Overall it worked fine but wanted to keep it street legal. The fuel cell hung a little low too.
It's red in color and is part # SUM 290113, 22 gallons. Yeah it's a little dirty too, but for free you can't beat it. Sorry I don't have the stock bail type filler.
email me at gkmissingca@netzero.net