: What Is The Pin Offset On A 63" Spring??should I Run Chebys??


71RCKCRZR RYAN
12-31-2001, 05:54 PM
RIGHT NOW I AM SUA WITH 4"SPRINGS ON MY CRUZAH...I WANT TO GO SOA. I DO NOT HAVE ANY SPRINGS TO START WITH SO SHOULD I RUN CHEBYS.I KNOW I WILL HAVE TO MOVE THE MOUNTS BUT WOULD IT BE WORTH THE EXTRA HASSLE FOR THE FLEX....

HOW MUCH LIFT DO YOU THINK I WOULD GET FROM THE WAY IT SITS ....IM GUESSING LIKE 2"-3""HOPEFULLY LESS.....

THANKS

Scout Dude
12-31-2001, 06:11 PM
I don't think that there is any offset. They are way too long for your FJ. Try rear wagoneers if you need long offset springs. Front waggy's if you just need decent (offset)springs

66CJdean
12-31-2001, 06:45 PM
I am pretty sure it is 1/2 of 63.

AZFord4x4
12-31-2001, 10:03 PM
yup, they're centered

EricFJ40
12-31-2001, 10:39 PM
You might try the F-150 or fullsize Bronco leafs. They are offset so that their short end is the same length as the long end of the cruiser springs. It makes it pretty easy to set them up without too much spring hanging out the front and back.