Just got these puppies from PM the other day, machined with a step up for more clearance....Nice and beefy... Enjoy :flipoff2:

What do they cost?

Is that 1/2" or 1" thicker than his normal ones? Wondering since it took a 1/2" spacer and a 15deg bend to get mine to clear the springs.

Originally posted by Ben W
What do they cost?

Not sure on the cost of these units, I had originally purchased his straight arms with his new knuckles (cast 1/2" higher and no steering arm). I had a clearance problem with my spring and pass. side tie rod. So I sent the old ones back and he sent these in return at no xtra charge because I had to wait for the machinist to get his order finished.

Im sure they will be more because of the xtra machining involed with these I will attach more pics so you can see. :D

Originally posted by Ben W
What do they cost?

another:

Originally posted by BigBadBob
Is that 1/2" or 1" thicker than his normal ones? Wondering since it took a 1/2" spacer and a 15deg bend to get mine to clear the springs.

The actual step up built into the arm is 1/2". I had to use his 1/2" spacer with these arms to get high enough to clear my 44044`s. Pass. side tie rod would hit the spring. :rolleyes:

I got the same ones from PM to replace the earlier versions, no charge, just exchange. Thats customer service! No more spacers needed for me.

Well, if we want to talk customer service about parts mike, I have my story to share:

I bought his plain old flat steering arms, but it turned out that those weren't tall enough to allow the tie rod to clear the springs. So I told him and asked about bent arms. So he sent me the 15deg bent arms as just an exchange. Didn't even charge shipping even though I told him to. Then those still didn't quite clear, so he sent me 1/2" spacer. Again no charge. The spacers cleared up everything and the truck steers great.

And the dude is totally willing to sit on the phone and explain stuff to you. Absolutely awesome customer service and I recommend his work to everyone.