Well, I got tired of the truck not fitting in the garage.

I can't work on it until 2:00 a.m. because it would be pretty loud running the chop saw with the doors open:flipoff2:

I tried airing the tires down to 2 psi front and 1 psi rear and it would fit, but I had to ratchet strap down the suspension, which was getting old fast.

So I took this:

Becasue of the inspiration from too much of this:

And taped off the area to be cut:

And yes I'll have a pirate4x4.com sticker on it before EJS instead of the ck5 sticker:flipoff2:

And this is what I ended up with:

And does it fit?

Barely.....

1/2 an inch to spare :)

And what I cut off.

It's just rough cut right now. I plan on finish cutting it and getting my cage installed now. I will still be able to just bolt on a piece of 18 gauge when I need a roof for bad weather.

Ryan

a cool addition to this would be a snap on canvas top for it. just a thought, i dont think it would be that expensive

wes

Now you just need to get the cage in it so we can roll it on the last waterfall of upper...

-Lance:flipoff2:

More like flip it over backwards.:flipoff2:

Ryan

dang man, couldn't you have just let some air out of the tires?

Originally posted by PJTPW
I tried airing the tires down to 2 psi front and 1 psi rear and it would fit, but I had to ratchet strap down the suspension, which was getting old fast.

Try reading the posts and not just looking at the pictures :flipoff2:


PJTPW, this rig is awesome. By far my favorite full size buildup of all time. Can't wait to see pics of it on the trail.

Sweet! :grinpimp:

Looks awesome!

You are a bigger crack head than me................. and an insperation.:flipoff2:

Todd

Originally posted by rockmup
You are a bigger crack head than me................. and an insperation.:flipoff2:

Todd

You should have seen the look on my neighbor's face when they walked outside and I'm standing on the hood with a sawzall.:D

Ryan

Yes, I know that look well........... and I think most of them dig it.