is all the wiring for this in the trucks that don't have the cluster? i just need to get the cluster, sending unit and then figure out the wiring, right?

did a search, didn't find anything

dave

If you get the cluster from the same year it is just a plug in deal, all the wiring is already there. You do have to change the oil pressure sender. At least that is all my buddy did on his 84 when he put an 84 cluster in.:cool: :usa: :cool:

For the 84-88 (for sure) you need to make sure that the cluster came out of a vehicle with the same tranny as the one you are putting it into. The wiring between auto/manual is different.

Also, you *may* need to run a wire to get the tach working. Some people don't, some people do.
bkg