Have the following off of a buddies Jeep:

Rear D60, ARB, 4.88's, 8 lug, not sure of the spline count he thinks that it may be a 31, 68" wide approximately. $1400 obo

(4) 36 x 12.5 x 16 TSL's with about 75% tread, minor cuts on a set of Eagle alloys with minor rash $900

SM435 4 speed with 205 transfer case. This includes the bell housing adaptor to a 4.0. $500

Pair of half doors. green with interior panels $300

Buyer pays shipping from 65807.

Would you sell just the tires? And they are radials, correct?

Few questions on the rear axle

What kind of truck is it from?

Drum or disk brakes?

Can you verify the spline count.

Thanks

Just a guess, but aren't all 8lug rears full floaters?

I guess so. I just removed that question. I'd like to know the answers to the others though.

Do you have pics of it?

Interested in selling the BH adapter? Will that bolt to a 4.2, 258?

Tires are TSL's which are the bias ones. Don't think that he wants to break them down.

Rear is disc. Not sure of the year because it was in the Jeep when he bought it. I can bring you pics LOL , I will be in Nashville next weekend. Can't deliver tho. (This trip at least but I am going to EROC's June event.)

He is wanting to sell everything together. But I will ask about the BH for you.

Will post tomorrow after I talk to him.

Can you get him to check the spline count. It is either 30 or 35 spline. If you are serious about bringing pictures I'll look at as many as you can bring. Otherwise I'd like to have some emailed to me.

Is there a number you can PM me so I can talk to you or the owner about the rear axle.

Thanks again.

sent pm JRowe.

Are you sure those tires are the bias ones and not radials?

Originally posted by OJTV8XJ
Tires are TSL's which are the bias ones

TSL's come in both bias and radial (and TSL/SX), all TSL means is three stage lug.

If they are 36/12.50/16 then they are radials.
36/13/16 is the bias ply size.

Originally posted by Midwestblue


TSL's come in both bias and radial (and TSL/SX), all TSL means is three stage lug.

If they are 36/12.50/16 then they are radials.
36/13/16 is the bias ply size.


If that is correct then I would say they are radials.:flipoff2:

Glad to educate ya'll:flipoff2:

I stand corrected they must be radials.

Still don't have pics, I was too busy this weekend. I will get some soon.

Did you and your buddy check the spline count?

Let me know.

Thanks

We were building a cage this weekend and didn't have time to pull the cover. He said that he was going to do that this week for you. Plus - get the pics.

Originally posted by TJ Ken
Just a guess, but aren't all 8lug rears full floaters?

No Some came as a SF with 35 spline shafts and c-clip axles, usualy out of Ford vans and some 3/4 ton trucks.

Tires are Bias - verified with the owner.

He wants 350 for the BH.