|
Fat 65L 01-04-2002, 12:39 PM Just done a spring over on my cruiser, under flex the cardinal is hitting the X member. After cutting more than half of it away for clearance i have decided to fab one out of tube. anyone got any pics of a combinded x member belly pan for their crusier. Rhino Shawn 01-04-2002, 01:49 PM I had the same problem when I installed my Dana 300. I ended up cutting out the Tube Crossmember and built my own. Since I'm unable to post pics here I have emailed you some. Let me know if you have any questions. Shawn Eric 01-04-2002, 02:24 PM Can you send me a pic too, I need to cut mine out as well? GloNDark 01-04-2002, 02:34 PM Send em to me and I will post em for you. I wanna see. chrisgmanning@hotmail.com wngrog 01-04-2002, 03:58 PM I designed this crossmember for 2 purposes. I had to cut out the origional crossmember for the Atlas fit, so i wanted another for help with Frame flex. Second, it is the place I mounted the Traction bar. I did not trust the small Cruiser bolts I have holding on my skidplate. It is removable so I can drop my tranny/transfer. BTW, check out that High Angle 1410 shaft! Shawn 01-04-2002, 05:10 PM Originally posted by GloNDark Send em to me and I will post em for you. I wanna see. chrisgmanning@hotmail.com You have mail:D Shawn 01-04-2002, 05:15 PM Originally posted by Eric Can you send me a pic too, I need to cut mine out as well? You have mail too,, | |