Looking for a set (4) aluminum or alloy 15" 6 bolt X 5.5" bolt pattern wheels for a trailer. Back spacing is 4". Anybody got a set for sale? Or know of a good economical source?

i have stock chevy 4x4 wheels on mine. jiMMy

The back spacing works? These are for a 28" Pace enclosed trailer with fenders. Thanks for the tip. I just don't want to spend $100-200 for a wheel X 4....................

what about 767s from summit racing? should run less than $40 a piece with free shipping

I found out stock Toyota IFS rims *almost* work, that extra .5" of backspacing (4.5") is what keeps them from working.

This was on my wife's grandfather's enclised race trailer than had a blowout on the interstate close to our house and we were trying to find a spare that would work.

Anyway - point is, check for used Toyota wheels (preferrably non-IFS)... most are between 3.5" and 4" of backspacing, so they should work well.

I run the older toyota wheels, aluminum 3.5 bs on a tailer. Came factory in the early 80's on 4x4. Only problem is the center hole on the wheels is larger than the diameter of the axle hub. Not sure if that is really a problem or not but I would rather have them match.

FWIW, FSJ Grand Wagoneer rims are 15"x7" with 3.75" of backspacing, and use that lug pattern.