|
mud-magnet 03-13-2004, 08:29 PM what R&P's came stock in a 89(i think) bronco II with a 2.9L, 5spd. ???? i'm not a ford guy and the search for this didn't show dick all..... asking for my brother.... l8r:flipoff2: Nobody 03-13-2004, 09:03 PM Dana 28 in the nose, and a ford 7.5 out back ryan_nwu 03-13-2004, 09:03 PM 3.73 and 3.45 are the most common 4.10s are a possibility too i'd bet money you have 3.45s. it seems to be the most common ratio with a 5spd Oatmeal 03-13-2004, 09:28 PM Originally posted by ryan_nwu 3.73 and 3.45 are the most common 4.10s are a possibility too i'd bet money you have 3.45s. it seems to be the most common ratio with a 5spd I think you mean 3.54 don't you:D .........Hans powerstroke73 03-13-2004, 10:06 PM Originally posted by Oatmeal I think you mean 3.54 don't you:D .........Hans Nope, D28 and 7.5s were 3.45 gears. If they're out there have yet to see a set that was 3.54s. My D28 and 7.5 (damn toothpicks :rolleyes: ) are both 3.45 gears mud-magnet 03-14-2004, 09:47 AM damn, no posibility the front ring and pinions will fit inot a jeep d30......is there:flipoff2: FoxFan 03-14-2004, 01:31 PM my project rig that's fixin' to have a d44/9" swap w/ 4.88's has 3.45's w/ 30x9.5's and a 5spd. and you have to ride the clutch to take off in high range. 4x4junkie 03-14-2004, 10:57 PM I just picked up a '90 with the 5-sp and it has 3.73 gears in it. I'd bet the 3.73s are more common in the later ones. And yes, those axles (especially the front) are toothpicks. Don't bother putting $$ into those things at all. (very late '90 ones have a decent front though (HP D35). moab_b2 03-15-2004, 01:11 AM I have an 89 2.9l 5speed and it had 3.73 in them. I also had the stock LS if that helps. I think that 3.73 was an option with the LS. mud-magnet 03-15-2004, 08:03 AM this one is a XL or LX which ever way it goes..... theres an "X" and theres an "L":flipoff2: thanks guys, either wat the front end won't work | |