Well Im going to "update " my fuel tank. I have a 71 ish tank in my 76'. I am going to get one of thoes poly tanks but, what else will I need? I have none of the vapor parts and dont even know what they intale...HELP.
Thanks
Tim CA

It sounds like you want a fuel separator to go back to the stock set up. I don't know that I would pay what they are asking for a new poly tank. Why not get a good used one or have a junk tank reconditioned at your local radiator shop for $50?

http://store1.yimg.com/I/coolfj40_1651_16052097

Im not dead set on the poly... They are ashing 165 for them, and Spector wants 125 for a used one. I was thinking for the extra $40 its not "used".. <IMG SRC="smilies/rolleyes.gif" border="0"> I don't know. Is there something wrong with the poly?
Hay where did you get the pic from?
TimCA

[ 09-05-2001: Message edited by: TimCA ]

Tim - I have some early 70's tanks in good shape. Someone tried to put one in a 1974 and said it did not work (too tall), but you indicate you already have an early 70's tank. Lemme know if you want a used one - $50 Andy

Andy, What I have now is the earlier tank with NO return lines at all. I want to get the proper tank for this (3/76) FJ-40. I believe it has a return to carb, Fuel separator lines, and breather lines. Is this what you have?? Looks like The Pic above.

TimCA

null

[ 09-05-2001: Message edited by: TimCA ]

Tim - I only have the early ones. Sorry I missed the point about you needing the return lines, etc. The later tanks are trickier to find. You might try Mudrak in Sonoma. All the best, Andy

Thanks,
Ill try there but i think the poly tank might be less of a headace in the long run... <IMG SRC="smilies/confused.gif" border="0">

TimCA