I just picked up an Sm420 w/ pto for $100. It got me thinking about the possibility of running a pto winch w/ power steering again. Since I haven't actually welded up my saginaw set up yet, is their a different ps set up that would still let me run my pto winch? Just poncering... <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/smokin.gif" border="0">

Scout saginaw! I run one with my factory PTO with no problem!

check out woodys site for tech <IMG SRC="smilies/biggrin.gif" border="0">

thanks... guess the <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> was a good choice tonight... <IMG SRC="smilies/biggrin.gif" border="0">

thats what I say,.... when in doubt <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

I know a couple of guys around here that are running the standard Saginaw P/S conversion and the factory PTO winch. They just redrilled the brackets and moved the winch toward the pasenger side.