Stock flares...

http://a8.cpimg.com/image/56/2C/8111958-7a64-028001AA-.jpg

No rear flares...

http://a0.cpimg.com/image/58/2C/8111960-3702-028001AA-.jpg

Rear TJ flares...

http://a1.cpimg.com/image/59/2C/8111961-7ae1-028001AA-.jpg

Didn't take too long and I think it looks okay. I will have a write-up of the install on my site in a few days, so take a look if you are interested. The TJ front flares wouldn't work, but I am going to be picking up more rear flares for the front soon. I'll post the front pics as soon as I get them. Probably a week or two. Let me know what you think. :smokin: ~Steve

At offroad.com there is a writeup from Jason Martin on a Wrangler fender flare install too. Hope this helps. http://www.off-road.com/suzuki/tech/flares.htm

It looks great squirrel. You should be able to get the flares for about 15.00 ea. Go to your local j**p dealer and ask the parts department if they use Crown parts. (If our customers are too poor or cheap to use factory we always suggest Crown.) The quality isn't as nice as factory but the price is right. I've had really good luck with mine. I get them about 3 days after I order.

Those look sweet did they allow you to open up the fender's
alittle more I'll wait for the right up.. Later

Originally posted by jp008
It looks great squirrel. You should be able to get the flares for about 15.00 ea. Go to your local j**p dealer and ask the parts department if they use Crown parts. (If our customers are too poor or cheap to use factory we always suggest Crown.) The quality isn't as nice as factory but the price is right. I've had really good luck with mine. I get them about 3 days after I order.

Thanks for the idea. I already have an arrangement to pick some more up tomorrow, though. NIB rear set. I almost wish they weren't new, I'm just gonna cut 'em up anyway. :rolleyes: Thanks, though. ~Steve

Originally posted by Rockrat
Those look sweet did they allow you to open up the fender's
alittle more I'll wait for the right up.. Later

I didn't trim the fenders, but you definiately could if you wanted to. Probably about an inch could be cut off all the way around. Hopefully work on that write up tomorrow, but we'll see. :) ~Steve

Okay, I've got the write-up on my site now. The link is under "My Samurai" page, under the exterior mods category. I also picked up two more rear flares today, so I am hoping to get those installed soon. :) ~Steve