ROKN ZJ
04-04-2004, 09:39 AM
OK guys I need to get rid of some off-road vehicles, so I figured I'd put these out there. Prices are negotable, but should all be well under what it would cost to build an equivalent rig. All prices are negotiable, so feel free to make any offer over $10k, and we'll try and deal :D
1998 Jeep Grand Cherokee Limited 4x4 $15,000
http://128.83.80.200/taco/is6.jpg
http://images.cardomain.com/member_images/7/web/343000-343999/343161_11_full.jpg
5.2l v8 28k, Dakota 231 transfer case
Custom longarm/radius arm lift aprox. 8", but very stable. Untrimmed fenders
Dynatrac Dana 60 rear axle, Detroit Locker 35splined shafts 3" wider than stock
Uncut 1979 Ford HP60 front axle, mini spool
4.56 Gears
35x12.5-R15 MTRs on Traileready beadlocks. OR I can probably put on some 325x80R16 on some other sort of beadlocks
ARB Bumper with 9000x winch, and ORGS Rocksliders.
It may or may not need paint depending on how you're going to use it. All the body panels are perfect, but one door is green, one is primer black, and the plastic paneling is white, so obviously you can spraycan it, or you can go all out and paint it up nice. It also seems to have an electric problem, which I'm tring to track down as we speak. Price is very negotiable, but trust me it's built correctly, and would make a nice DD/trail rig.
Also, the biggy:
1993 Jeep ZJ $12,000 as it sits NOT STREET WORTHY!
http://www.pirate4x4.com/albums/fernley03/abo.jpg
5.2l V8 100k+, 321Tcase
2.5" 16" travel Swayaway coilovers, with custom longarm suspension ~10" of lift (maybe more I dunno), brand new beefy as hell control arms.
Chevy Dana 60 rear with 35spline shafts, spool
Ford Dana 60 front with 35spline inner/outer 300M CTM Shafts (very expensive, nearly unbreakable), detroit, brand new full hydro steering setup.
4.88 gears
44" Super Swamper TSLs on white wagon wheels (should probably be mounted on hummer beadlocks to prevent beadloss) OR If owner would prefer I could throw on a set of 37x12.5R17 Krawlers on Walker Evans Beadlocks, or a set of practically brand new 38.5x14.50-15LT Super Swamper TSL SXs.
Winch and bumper should be replaced. Has full roll cage which works very well. Very safe off-road.
Anyway this is obviously for someone who wants to go extreme, still wants a ZJ, but doesn't want to cut their current ZJ up. Price can go down if you choose the SXs or would prefer stock shafts in the front axle. I also have spare driveshafts, maybe some axle shafts, and some other assorted spares. Again price is very negotioable, especially without the shafts or tires which are pretty $$$.
Anyway let me know if you have any questions. Delivery might be arranged depending on where you live. Buyer of blue ZJ should plan on trailering it to the trails as it is not close to streetable.
Or if someone really wants to get serious I'll have a Cambell Ent. Liberty buggy for sale within a month or so. Dana 60s, 4.0l, Dana300, Tire/wheel combos can be discussed. Completly comp ready. E-mail me or PM me for more info. $25,000 negotiable. I can discuss specific deatails if you like I just didn't write more right now since it still has to compete a couple more times for me, and I haven't figured out exactly what will be replaced, what spares will go with it, and things like that.
http://www.imagestation.com/picture/sraid107/pee724abb19311c3dc88df4f7a07ed32d/f96714f2.jpg
http://www.pirate4x4.com/albums/stgeorge_2004_day1/aac.jpg
http://www.pirate4x4.com/albums/calrocs_blvdbrawl2004_day2/ahk.jpg
Again all prices are negotiable, I just wanted to start somewhere, so I don't get a lot of lowball bids in the $300 range
Hal
1998 Jeep Grand Cherokee Limited 4x4 $15,000
http://128.83.80.200/taco/is6.jpg
http://images.cardomain.com/member_images/7/web/343000-343999/343161_11_full.jpg
5.2l v8 28k, Dakota 231 transfer case
Custom longarm/radius arm lift aprox. 8", but very stable. Untrimmed fenders
Dynatrac Dana 60 rear axle, Detroit Locker 35splined shafts 3" wider than stock
Uncut 1979 Ford HP60 front axle, mini spool
4.56 Gears
35x12.5-R15 MTRs on Traileready beadlocks. OR I can probably put on some 325x80R16 on some other sort of beadlocks
ARB Bumper with 9000x winch, and ORGS Rocksliders.
It may or may not need paint depending on how you're going to use it. All the body panels are perfect, but one door is green, one is primer black, and the plastic paneling is white, so obviously you can spraycan it, or you can go all out and paint it up nice. It also seems to have an electric problem, which I'm tring to track down as we speak. Price is very negotiable, but trust me it's built correctly, and would make a nice DD/trail rig.
Also, the biggy:
1993 Jeep ZJ $12,000 as it sits NOT STREET WORTHY!
http://www.pirate4x4.com/albums/fernley03/abo.jpg
5.2l V8 100k+, 321Tcase
2.5" 16" travel Swayaway coilovers, with custom longarm suspension ~10" of lift (maybe more I dunno), brand new beefy as hell control arms.
Chevy Dana 60 rear with 35spline shafts, spool
Ford Dana 60 front with 35spline inner/outer 300M CTM Shafts (very expensive, nearly unbreakable), detroit, brand new full hydro steering setup.
4.88 gears
44" Super Swamper TSLs on white wagon wheels (should probably be mounted on hummer beadlocks to prevent beadloss) OR If owner would prefer I could throw on a set of 37x12.5R17 Krawlers on Walker Evans Beadlocks, or a set of practically brand new 38.5x14.50-15LT Super Swamper TSL SXs.
Winch and bumper should be replaced. Has full roll cage which works very well. Very safe off-road.
Anyway this is obviously for someone who wants to go extreme, still wants a ZJ, but doesn't want to cut their current ZJ up. Price can go down if you choose the SXs or would prefer stock shafts in the front axle. I also have spare driveshafts, maybe some axle shafts, and some other assorted spares. Again price is very negotioable, especially without the shafts or tires which are pretty $$$.
Anyway let me know if you have any questions. Delivery might be arranged depending on where you live. Buyer of blue ZJ should plan on trailering it to the trails as it is not close to streetable.
Or if someone really wants to get serious I'll have a Cambell Ent. Liberty buggy for sale within a month or so. Dana 60s, 4.0l, Dana300, Tire/wheel combos can be discussed. Completly comp ready. E-mail me or PM me for more info. $25,000 negotiable. I can discuss specific deatails if you like I just didn't write more right now since it still has to compete a couple more times for me, and I haven't figured out exactly what will be replaced, what spares will go with it, and things like that.
http://www.imagestation.com/picture/sraid107/pee724abb19311c3dc88df4f7a07ed32d/f96714f2.jpg
http://www.pirate4x4.com/albums/stgeorge_2004_day1/aac.jpg
http://www.pirate4x4.com/albums/calrocs_blvdbrawl2004_day2/ahk.jpg
Again all prices are negotiable, I just wanted to start somewhere, so I don't get a lot of lowball bids in the $300 range
Hal