alright, I got a front toy axle with 5.29's, and a detriot with all pro steering arms for $900. :D My question is what kind of tie rod, and drag link should I use, I was thinking rockstomper, same price as all pro, but looks beefier. What do you guys think?

I like my rockstomper....had problems with the left hand thread jam nut(still do) but the damn thing is friggin huge, you could club somebody with it:D:D(weighs in at 16lbs)

nice. If you can seriously hurt somone with it, it must be good:D :D

Using rods larger than 1.125" will cause interfearance between the rod and spring.

Originally posted by Chris Geiger
Using rods larger than ours will cause interfearance between the rod and spring.

Wouldn't that depend on the springs used, as well as the arm riser distance from the knuckle surface?

Seems kinda odd you would make a blanket statement like that...

Originally posted by DRM


Wouldn't that depend on the springs used, as well as the arm riser distance from the knuckle surface?

Seems kinda odd you would make a blanket statement like that... :p :p :p :p :p :p :p :p :p :p

Originally posted by Chris Geiger
Using rods larger than ours will cause interfearance between the rod and spring.

Hey people have called me with interfearance issues on this.

was that while running your springs ;) ?

If your running Hy-Steer Arms, there is no need to run the rock rod. You will never hit it.:rolleyes:
Scott will probably sell you a drag link and Tire rod in the smaller diameter for Hy-steer. The Rock Rod is only for low crossover. I think his price is $60 apiece. And $70 for the Rock Rod.

Exactly - on any high steering setup, a HD oversized tie rod is simply a waste... sorry I missed that part with my first reply :p