|
v6toy4x 01-10-2002, 11:16 AM i was at ott industries web site and saw there new toy/dana 300 adapter this might solve the broken input problem in the second transfer by goin to a 32 spl input in the dana 300 it also had full clockability to rotate the 300 for max clearance ---iknow -who wants jeep parts in their toy - just looked interesting any one using it? Hypoid Drive 01-10-2002, 04:15 PM well the 300 rocks ! but you with that adapter have the ability to run and atlas as well + 2wd low . as for the 32 spl. input I believr you meant 23 spline input , you may upgrade the stock 26 spline output to 32 but not the input . The quaility of these adapters are beyond words . I am just pissed at all the years I bought other adapters made out of sand cast aluminum!!!!!!!!!1:smokin: ColdNorth 01-10-2002, 04:30 PM Can't you true-twinstick a Dana 300? v6toy4x 01-10-2002, 04:48 PM Originally posted by techguru73 well the 300 rocks ! but you with that adapter have the ability to run and atlas as well + 2wd low . as for the 32 spl. input I believr you meant 23 spline input , you may upgrade the stock 26 spline output to 32 but not the input . The quaility of these adapters are beyond words . I am just pissed at all the years I bought other adapters made out of sand cast aluminum!!!!!!!!!1:smokin: i believe you can upgrade the input with an advance adapt input for th400 the only question is what the o.d. of the toyota shaft is to tell if you can spline it to 32 spline or not-the next best might be a th350(27spl)input from advance and spline the toyota to a 27 spline either one of these would be considerably stronger than a 23 spline there is nothing worse than breaking the input on the rear case of a doubler Hypoid Drive 01-10-2002, 04:49 PM yes you can!!:D ColdNorth 01-10-2002, 05:19 PM Originally posted by techguru73 yes you can!!:D Was that in response to my question? ROKTOY 01-10-2002, 08:54 PM It's my understanding that no one has broken a 23 spline input on a Toy. Anyone know different? Jay Hypoid Drive 01-10-2002, 09:14 PM Originally posted by ColdNorth Was that in response to my question? sorry there must have been other posts inbetween answering yours yes u can have a true twin stick in a 300:smokin: fullywrecked 01-10-2002, 09:28 PM Originally posted by ROKTOY It's my understanding that no one has broken a 23 spline input on a Toy. Anyone know different? Jay I bet you could if you had a 502 SM465 and 4.7 marlins in all three cases,maybe. Hypoid Drive 01-10-2002, 09:35 PM im running 2 toyota reduction boxes and an atlas and havent broke anything:roxy: :roxy: :roxy: | |