I have an early Series IIA and am in need of a steering wheel. Does anyone know of an aftermarket steering wheel that will fit or an adapter that I can use. The wire spoke steering wheels are hard to find used (that are still in decent condition) and far too expensive to buy new.

Thanks,
Dave@deltafoxtrot.com

So you have the early type that requires a pinch bolt to clamp it on the shaft of the steering box - with no threaded section at the top of the steering column shaft?

I have never seen an aftermarket wheel to suit this type. I changed a steering box to a later type so I could use a SIII wheel on one of my IIA'S. So you could do this if you can get a late IIA or SIII steering box and wheel cheap. Otherwise you may have to cut/grind all the plastic stuff off your old wheel to get back to the metal splined section, and weld on a boss to bolt an aftermarket wheel to.

If you change your steering column to that from a Series III, you can use a SIII, 90/110, Defender, Range Rover, Discovery, or any aftermarket wheel suited for any of the above.

i bought an early IIA that has an adapter with aftermarket steering wheel...sorry I do not know where it came from but they are available....
maybe go look at some hotrod shops

ok.. i found a company in the UK that sells Astrali brand steering wheels and they have a boss that will fit the early IIa style steering boxes. Cost for the 15" wheel and boss adapter is about $70US not including shipping.

Their website is: http://www.brookwell.co.uk/acatalog/INTERIOR.html (http://)

thanks for everyones help
Dave