|
: XD 9000i quit... any ideas??? Sharp 01-13-2002, 01:21 PM while winching, and changing spooling directions the winch just quit, can't get it to real in or out, the free spool works fine but there is no life to the winch any ideas? anyone have this happen to them? Thanks. wild1 01-13-2002, 01:22 PM Chances are it is a bad solenoid. But it could be a bad battery coneection or motor. Does it click when you try to winch? Sharp 01-13-2002, 01:25 PM no clicking or nothing, there is absolutly no response from it at all. we checked the connections to the bat , the same thing happened last winter, and it did the same thing, no responce then it worked when tried in the spring, do you guys know if they have a tendency to freeze up at all? wild1 01-13-2002, 01:28 PM It would have to be -70 degree celcius for one of those to freeze. Did it make any noise like a cracking sound when it quit or it worked the last time you used it and now it isnt working? Sharp 01-13-2002, 02:43 PM well it worked for a bit, then we tried hooking up another way and while reeling out my buddy flipped it quickly so it would reel in and there was a funny sound , ever since it doesn't work.:confused: wild1 01-13-2002, 02:49 PM If the funny sound was a crack then you probably toasted your motor. Sharp 01-13-2002, 03:14 PM :eek: how costly is that???:( :( Cutch 01-13-2002, 03:24 PM Last year I had the motor on my Ramsey 6000 rebuilt and it cost a $100 Canadian. Sharp 01-13-2002, 03:27 PM i hope thats not the prob cause it's only been used about 4 times!! wild1 01-13-2002, 04:38 PM How old is it? I blew up the motor in my new 8274-50 and it was covered under warranty. It was a mechanical problem though. if you overheated the motor they wont cover it. | |