|
: What's the easiest way to check endplay? diiulio 01-13-2002, 01:27 PM I don't have a dial indicator, so is there any way to check end play of my NP435 without it? If not, should I just bring it to a local tranny shop and have them check it? wild1 01-13-2002, 01:29 PM A dial indicator. If you rebuilt trannies for a living you could probably do it by feel. Chark 01-13-2002, 06:18 PM If you don't have a dial indicator as you said....clamp something on the end, say from a mounting ear...fabbed 90 degree angle or anything solid and check the clearance, end play with a set of feelers gauges. I think it would be easier for me to show you than to try in put this down on a keyboard. Hope this helps....good luck!!:confused: Blitz 01-14-2002, 02:19 PM Well I usually start with a finger, if she let's ya get that in there then you know ya at least got a chance. After the finger I give her a second and then try the whole thing. :flipoff2: :flipoff2: Martimus93YJ 01-22-2002, 07:56 PM :laughing: :laughing: :laughing: :laughing: :laughing: | |