just installed my allpro 4 inch front springs and new spring mounts, brake lines are just a little tight, front drive shaft a litttle too short, rear springs should be in to night, would post some pics if i knew how to.

Email them to me and I can post them for you

DRM033@AOL.COM

I don't know what you are working on but the drive shaft is ok on my 84 x-tra cab. Just cut the break line bracket from the top of the frame and tack it on the side of the frame.(if you are on a budget)

my driveshaft is a little to short when i flex it all the way.

if you are on a budget like me, get three rear break lines off a toyota and put them together. they will double the lenght of the fronts. they have a male and female end. to make mating easier. those :rainbow: don't understand why men and women should be together:D

thanks guys, i need driveshafts because im installing dual cases