: CHRIS GEIGER--all pro leaf springs


Booger Weldz
01-13-2002, 02:52 PM
hey chris,
read in a thread awhile back that youve been removing leafs from the all pro pack to lower your truck. ive gone nutz with the sawzall and made a lot of room for the tires, what leaves are you pulling outta the packs(front and rear 4 inch sets), and which ones can i get away with and keep it managable on the highway and haul camping gear, tools, spares on the trail(SAS early 4runner)?? thanks in advance;)

Chris Geiger
01-13-2002, 03:38 PM
I would start by removing the bottom (shortest) leaf. Give this a try, it will drop the rear about 1" and soften the springs a little too. On my truck I removed the 2 bottom leafs on both springs, but the back of my truck is extremly light. On my front springs I removed one front leaf, droping it about 1"

Usually the center pin bolts can be reused. If you need new bolts let me know and I will send you a set.

justmyluck
01-13-2002, 06:24 PM
Chris, do you response to your personal email anymore?
I had raised a question about the hy-steer arms I rec'd from Allpro.
Thanx Tom

Chris Geiger
01-13-2002, 06:44 PM
I reply to most emails, but not all, simply too much email. If you have a question about a product call me at the shop. 909-658-7077