|
sluicebox 01-13-2002, 04:27 PM I have a 85 extra-cab with an auto trannie I need to put a 3 inch body lift on it but I can't seem to find one. All of the kits I've seen say manual only. what do I need to do to the linkage to make this work. :beer: :smokin: projectcrawler 01-13-2002, 04:36 PM You need an extension bracket for you shifter linkage. NWOR(pardon my french) sells one. And Roger Brown has designed one for $50 w/out a kit and $45 with the purchase of a body lift kit. I highly recommend him. http://4crawler.cruiserpages.com/4x4/ForSale/BodyLiftKit.shtml#ATbracket <hr align=left width=144> <img src=http://www.systemslogic.com/projectcrawler/smlrcalvinifs.gif> GBOGH <img src=./images/elite.gif> <a href="http://www.projectcrawler.com">www.projectcrawler.com</a> projectcrawler 01-13-2002, 05:24 PM Here's a guy selling one, you could probably get for cheap. http://www.ricktard.rockcrawler.com/custom2.html <hr align=left width=144> <img src=http://www.systemslogic.com/projectcrawler/smlrcalvinifs.gif> GBOGH <img src=./images/elite.gif> <a href="http://www.projectcrawler.com">www.projectcrawler.com</a> OOP'S 01-13-2002, 05:41 PM I need to put a 3 inch body lift Why do you need a 3" BL, Over time everyone I know that had a 3" BL has cut it down to 1" or taken it off complety!!!!!!!:D :usa: :D projectcrawler 01-13-2002, 05:44 PM Unless you do a drivetrain lift. Just depends on the setup you're going for. <hr align=left width=144> <img src=http://www.systemslogic.com/projectcrawler/smlrcalvinifs.gif> GBOGH <img src=./images/elite.gif> <a href="http://www.projectcrawler.com">www.projectcrawler.com</a> toy 4 rox 01-13-2002, 07:25 PM 2" is the max i would do just my .02 LT's TOY 01-13-2002, 08:40 PM yup, just to echo the point, I'm in the process of trimming mine down to about 1.5 in. Wish I didn't need any at all... Garza 01-14-2002, 08:42 AM Yep, I still have that bracket. $15 plus ship and its yours. Just buy the body lift for the manual, and all u need is this bracket. I use a 3" Body lift on my 84 4runner. No prob, but I am set up a lot different than most of these guys. I have a 350/Th350/Np203, Fullwidth Dana 60/14 bolt, and 40" Boggers. I am still going to have to trim an ass load of fenders before I get these tires not to rub. Plus My cage is going to be 6 point(at least) to the frame with plates at the body, so the body isn't going anywhere. Go for it. sluicebox 01-18-2002, 04:51 AM Thanks for all the input. :usa: | |