|
: D300 in, now for front axle? el General 01-13-2002, 10:08 PM Are these my only options? Jeep Grand Waggie 75-79 passenger drop 60" Scout II all passenger drop 58" Custom Shaved diff -passenger side drop. Not sure if there was ever a Chevy or other Dana 44 w/passenger drop? THNX hoehand 01-14-2002, 04:21 AM chevy d44 passenger drop, alreadt set up for a spring over 69 inches. not sure of the exact years around mid 70's Brian1 01-14-2002, 05:40 PM I use a 70's j10 truck d44 with a pass drop CJ-Jeeper 01-14-2002, 06:15 PM I believe on the Chevy's: 8 lug = 69" 6 lug = 67" Dodge is also passenger side hy_desert_4wheeler 01-14-2002, 08:16 PM 80 to 84 Dodge passenger drop-disc brakes-5on 5 1/2-hubs 85 to 93 passenger drop-disc brakes-5on 5 1/2-CAD 74 to 79 passenger drop-disc brakes-5on 4 1/2-fulltime ?? to 73 and some 74's passenger drop-drum brakes-5on 5 1/2-hubs Tommy 01-15-2002, 01:54 AM Chevy used the Dana 44 front from 73-80. Also read that they used the 10 bolt starting in 77. kyrel69 01-15-2002, 02:19 PM yes chevy use a 10 bolt front axle from the late 70's and up. It has the same axle size as the dana 88. 8.5 ring gear but is only 28 spline. attachcurrie 05-06-2002, 07:06 AM I want to run full width axles and trying to determine how it will look. Would this picture be an accurate photo of a Jeep running a full width 69"? http://www.jeepzine.com/pics/jeep/adam_ant.jpg redruM 05-06-2002, 09:46 AM that would be pretty close The Rockslut 05-06-2002, 09:51 AM Here is a few pics of my ride. Full width! The Rockslut 05-06-2002, 09:53 AM Another The Rockslut 05-06-2002, 09:56 AM One last one with the chevy 44 and 38.5 SX's and 3 5/8" BS The Rockslut 05-06-2002, 09:59 AM Now with the full width GM 60 front and Ford D 70 Rear. 2.5" BS and 39.5" TSL's bigdude 05-06-2002, 10:00 AM Here is a few pics of my ride. Full width Those make me feel really good about what will be pulling out of the garage Wednesday:D The Rockslut 05-06-2002, 10:00 AM last one..................promise attachcurrie 05-06-2002, 11:10 AM What is the WMS to WMS of the axles? Also do you straight on shot from the front like the last picture, not flexing. Thanks!! The Rockslut 05-06-2002, 11:33 AM Those are the straightest pics that i have. On my current setup GM 60 69" wide. With 2.5" BS adnd 39.5" TSL's the inside of the tire is exactly at the outside of the tub. I have 3.5" BS beadlocks coming. I am currently at 89" wide outside to outside of tire. With the D44 38.5" SX's and 3 5/8" BS I was at 85". So with my new wheels i will be at 87" outside to outside Jonathan M 05-07-2002, 04:23 AM Sweet rig Rockslut, not that it wasn't sweet before.....The 39.5's look way more savage than the 38.5's. How did you make out with the MJ leafs in the rear? Is that what you went with after, I belive you mentioned it in a post a while back. Are they soft and flexey? What are the specs on them? How long are they, and do they have a offset center pin? Thanks | |