I was wondering if they make a 10 spline flat adapter plate for the front to bolt on the front drive shaft onto my np205. I need help I need my 4 wheel drive back. any help, info, or suggestions will be greatly apreciated. Thanks rob

it was never made in a stock application if you are needing the flange style -if you are looking into having the flange to fit your needs on the driveline bolt up than there is an output shaft 30 spline that needs to be changed -takes about 1 hour in the rig and the output shaft is about 70$ new- Jess

same info you got on your other post happy now? (http://www.pirate4x4.com/forum/showthread.php?s=&threadid=24133)