the rotors are shot, but the hub pieces are ok. being over 10 years, do i have a change to separate these two apart?

http://home.off-road.com/~lifted/pub/misc/858c.jpg

or are these stuck together forever and i should just get all new parts?

Well.....the real question is...how big a boy are u & How big is you BFH!!!!


Man...before I went to buy new chit...I'd hit em' up w/some rusteater, B-12, whatever...couple good penetrating sessions ( :laughing: )

Then the next night go to town with aformentioned BFH.
Good luck

or use a press ;)

Spray the studs w/ PB Blaster, bet shit in the world. Put a couple of junk nuts on the stud so the top one is right at the end of the stud. Then, picture the person you are most pissed off at and place their face on the end of the stud. Now, pound their face with a BFH!

you're right. if i ruin them, then i'll get new ones. i'll try pounding on them.

Use a big brass hammer, thatll knock em right out, 1 swing.

You'll need some new ones. Send the old ones to me. I'll even pay shipping. PM me for details........

i got them apart. do you want the rusty rotors? :D:D:D