I picked up an 84 Dodge that I put a set of one tons under. The problem is that the transfer case is broke. It has the NP 435 and 208? case. My question is what case will bolt up and have the right spline count? I have the cheveys figured out, Fords are all the same, but this is the first Dodge I ever messed with. Thank's to all you Mopar guys out there.

I believe you want the married 205 that came in 80s dodge one tons.

have you checked with any junkyards in your area

You can tke the T-case from any 80 to 93 dodge. They all have the same spline count and the round mounting face. This would include the 205-208-231

Originally posted by hy_desert_4wheeler
You can tke the T-case from any 80 to 93 dodge. They all have the same spline count and the round mounting face. This would include the 205-208-231

Thanks that was the info I was looking for. I was thinking using a 205, just wanted to make sure I could use the ones behind the Autos.

Originally posted by emsoffroad


Thanks that was the info I was looking for. I was thinking using a 205, just wanted to make sure I could use the ones behind the Autos.
The autos also had the 6 bolt round pattern and 23 spline shaft.