|
nipomoman 06-08-2004, 09:32 AM I swapped in a 4.3 liter Chevy V6 in my 64 Tuxedo Park. I would like to know which frame mounted fuel pump to run from my fuel cell. Could someone please provide that information for me. A part number would be great also. Thank you. :grinpimp: Beater_K20 06-09-2004, 06:20 PM what induction system are you running? that will make a huge difference it what kind of pump you need. unimog12chicks 06-09-2004, 08:34 PM summit and jegs both sell pumps that are self regulating ( it is controled buy the regulator on your injection. you can buy one pump that will run 0 to 90 psi or if you have TBI that system runs at 9 to 14 psi and any pump that will put out 15 psi or more continuous will work. just go on line with summit and look they have the pump for you. they range from 50 to 300.00 $ if you still need a part # PM me and I will look it up stromainchef 06-09-2004, 08:41 PM i am swapping in a 4.3l in my Isuzu Trooper and getting rid of the 2.8, Thank God! Anybody see any problems arising? it is from an 89 Blazer and I have the TBI, computer, starter and everything else. Should I go carb instead? Any suggestions appreciated! Beater_K20 06-09-2004, 09:53 PM i am swapping in a 4.3l in my Isuzu Trooper and getting rid of the 2.8, Thank God! Anybody see any problems arising? it is from an 89 Blazer and I have the TBI, computer, starter and everything else. Should I go carb instead? Any suggestions appreciated! yup... Bellhousing is different, assuming your Trooper has a Corprate 2.8 in it. | |