I have a D44 from a 78 Wagoneer that are going under my 86 CJ-7. Using my D30 knuckle on the D44.
Planning to use spindles from a Chevy K5 Blazer (or the 78 wagoneer D44 spindles?). Wondering if I then can use the hub from a 81 Ford Bronco w/5 on 5 and half bolt pattern. Have read that people use 71-79 Bronco Hubs for this setup. Where I live it's hard to find Bronco and F-150 parts. The only hubs I have found are from a 1981 Bronco.
The outer shafts on the D44 are 19 splines.

Thanks Norwegian Jeeper

81 Ford will be Fine...I used 83 Bronco Rotors and Hubs

Thanks!
Did You use Chevy spindles? Do You know if iI can use the Wagoneer spindles?
And wich caliper did You use??

You want to use either 77 or older Chevy spindles or 74-77 Wagoneer spindles along with the Chevy or Wagoneer (they're the same) calipers. Use the Ford rotors.