All Bend-Tech EZ users

[fabcam]

18 new templates are now available for Bend-Tech EZ. This will be in addition to the 52 templates that you currently have. Please email us your name, address, phone number and serial number (found on the cd case). This will allow us get you registered. As new templates become available they will be automatically emailed to you.

support@2020softwaresolutions.com

In addition, we are on the hunt for ideas on new templates. If you have any ideas please let us know.

[kwrangln]

Care to go into any detail about what these templates are for? May generate some intrest in the software for the people who dont have it.

[fabcam]

These are shots of the new templates. Each different part style has 3 templates for inside, outside and centerline dimensional input.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=133024&stc=1


These are the previous templates currently in Bend-Tech EZ (http://www.2020softwaresolutions.com/prod01.htm). All except for one part style has 3 templates; again for inside, outside and centerline dimensional input. In addition, a custom part function is available for up to 6 bends.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=133025&stc=1

[broncofreak2000]

Hey Fabcam I sent you an e-mail with my info. Thanks Richard

[socalchef]

any demo versions of the software? i want to make a grill hoop, would like to try the software. if i can get the hang of it i'd definitely want to be using it more frequently...interested to see what it's like to use the different features and see if it would be beneficial to me.

[jeeplord]

It's well worth it.

I got it with my bender a month ago, I've done some pretty complicated bends, no problem because the software works so well. Enter in your dimensions, inside, outside, or centers and it gives you a nice picture of what you need. Measure your tube and go.

[fabcam]

any demo versions of the software? i want to make a grill hoop, would like to try the software. if i can get the hang of it i'd definitely want to be using it more frequently...interested to see what it's like to use the different features and see if it would be beneficial to me.


You can download a trial version from this link Bend-Tech EZ (http://www.2020softwaresolutions.com/prod01.htm) . The trial version is only limited by the material and the tool it has loaded. This will give you a full feel for the software. You will not be able to do a production part, however, you will find the software to be extremely easy to use. Currently there are almost 1000 customers using this product. To date we have NOT had a single request for product return. I believe this is because of a very good product and we support our customers beyond their expectations.

Bend-Tech EZ is so simple that most people pick it up in about 5 minutes.

For a cost of $42.00 plus shipping (this is a special price for the Offroad Fabrication Network (http://www.offroadfabnet.com), list price is $59.00) it doesn't take very much metal for this to pay for itself, not to mention time and frustration.

If you have any specific questions please post them or email me.

[bignissan]

got the up-date today :) Thank you!

[jeeplord]

got my update, thank-you much!

[fabcam]

Thanks everyone.

You should have received your new templates. Planning to have some more in a few weeks. They will automatically be emailed to you.

If you havn't regestered your Bend-Tech EZ yet, please do so. I will have the current set of updated templates to you in a short time.

Some of you gave some great ideas for new templates, keep them coming as well.